5 |
USER INSTRUCTIONS
1. Remove the unit from the box and take off any protective wrapping.
2. Place the heater on a smooth level surface and least 30 cm away from
any obstacles.
3. Plug your heater into the power supply. Make sure your power supply
corresponds to the power indicated on the rating label.
4. When plugged in, turn the switch to the position “ “, the heater will
works at the low heat situation. Turn the switch to the position “ “, the
heater works at the high heat situation.
5. When you want the unit to oscillate, turn the switch to the position
“ “, the heater will works at the low heat situation; turn the switch to
the position “ ”, the heater works at the high heat situation.
6. When you want to turn off the heater, please turn the switch to the
position “ “ working for 3 minutes firstly, then turn the switch to the
position “OFF”.
the heater is fitted with a safety device, if the heater overheated, it will stop
working, please turn the heater off and inspect for any blockage of inlet or
outlet. The safety device will restart the heater after several minutes later
If the safety device failed to restart the heater again, return the heater to
your nearest service centre for examination or repair.
OVERHEATING SAFETY DEVICE
