| 4
IMPORTANT SAFEGUARDS - CONTINUED
11. If the supply cord is damaged, it must be replaced by the
manufacturer’s service agent or a similarly qualified person to
avoid a hazard.
12. Avoid the use of an extension cord as this may overheat and cause a
risk of fire.
13. The heater should only be used on flat, dry surfaces.
14. Do not place this heater near flammable materials, surfaces or
substances, as there may be a risk of fire. Keep the above flammable
materials, surfaces or substances at least 1 m from the front of the
product and keep them away from the sides and rear.
15. Do not use the heater in any areas where petrol, paint or other
flammable liquids are stored e.g. Garages or workshops.
16. Don’t use this heater in the immediate surroundings of a bath, a shower
or a swimming pool. Never position the heater where it may fall into a
bathtub or any body of water.
17. This heater is hot when in use. To avoid burns and personal injury, do
not let bare skin touch hot surfaces. Use handles when moving
the product.
18. Be sure that no other appliances are in use on the same electrical circuit,
as an overload can occur.
19. After switching on or off the appliance it is possible to hear a slight
noise (click) due to the heating or the cooling of the appliance.
This is normal.
Do not use this heater with a programmer, timer or any other device that
switches the heater on or off automatically, as this could cause a fire risk if
the heater is covered or positioned incorrectly.