3
Specifications
Specifications apply at 18°- 28°C after one hour warm-up, at maximum output into 50
Ω.
TG1000 limits, where different, are shown in square brackets [ ] after the TG2000 limits.
WAVEFORMS
Standard waveforms of sine, square, triangle, DC, positive pulse and negative pulse.
Sine
Range:
1mHz to 20MHz [10MHz]
Resolution:
1mHz or 6 digits
Accuracy:
10 ppm for 1 year; ± 1mHz below 0.2Hz
Temperature Stability:
Typically <1 ppm/ºC outside 18° to 28°C
Output Level:
2.5mV to 10Vp
−
p into 50
Ω
Harmonic Distortion:
<0.3% THD to 20kHz (typically 0.1%)
<–45dBc to 300kHz
<
−
35dBc to 20MHz [10MHz] (typically <
−
40dBc)
Non
−
harmonic Spurii:
<–55dBc to 1MHz, <–55dBc + 6dB/octave 1MHz to 20MHz [10MHz]
Square
Range:
1mHz to 20MHz [10MHz]
Resolution:
1mHz or 6 digits
Symmetry Control:
20% to 80% (1% resolution) 1mHz to 20MHz [10MHz]
Accuracy:
10 ppm for 1 year; ± 1mHz below 0.2Hz
Output Level:
2.5mV to 10Vp
−
p into 50
Ω
Rise and Fall Times:
<22ns
Aberrations:
<5% + 2mV
Triangle
Range:
1mHz to 1 MHz
Resolution:
1mHz or 6 digits
Accuracy:
10 ppm for 1 year; ± 1mHz below 0.2Hz
Output Level:
2.5mV to 10Vp
−
p into 50
Ω
Linearity Error:
<0.5% to 100 kHz
Positive and Negative Pulses
Range:
1mHz to 20MHz [10MHz]
Resolution:
1mHz or 6 digits
Symmetry Control:
20% to 80% (1% resolution) 1mHz to 10MHz
Accuracy:
10 ppm for 1 year; ± 1mHz below 0.2Hz
Output Level:
1.25mV to 5Vp-p into 50
Ω
positive or negative only pulses, with
respect to the DC Offset baseline.
Rise and Fall Times:
<22ns
Aberrations:
<5% + 2mV
OPERATING MODES
Continuous
Continuous cycles of the selected waveform are output at the programmed frequency.
