Quick Start Up
Here is a Quick Start Up guide to get Z-stick Mini to work with the Z-Wave PC
Controller. The Z-Wave PC Controller is a PC application software tool that enables
communications with Z-Wave nodes, such as switches and sensors.
Connect Z-stick Mini to your computer.
Install the Virtual COM Port (VCP) drivers and CP210x VCP Drivers, if
required by your Operating System. The latest drivers are available at
http://www.silabs.com/interface-software. Note: The driver is WHQL certified. No
installation is required for Window OS.
Note: The driver is WHQL certified. No installation is required for Window
OS.
1.Install and Run the Z-Wave PC Controller from Simplicity Studio.
2. Click on the “Setting-wheel”
in the Right-Top corner of the PC Controller and select
“Silicon Labs CP210x USB to UART Bridge”. Click OK.
