* Do not put the cable on a hot surface or hang if from the kitchen table. Your children can be hurt when they
are trying to drag the cable and turn down the machine.
* If the supply cord is damaged, it must be replaced by the manufacture of its service agent or a similar
qualified person in order to avoid a hazard.
* Do not continuously operate the machine, the motor will overheat. Or turn off the switch every 1 minute, and
let the motor cool down at least 1 minute. The motion could not be more than 3 cycles. More motion should
be done after the motor cool down. If not, the motor may damaged.
* Switch off the appliance and disconnect from supply before changing accessories or approaching parts that
move in use.
* Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
* Using the machine, do not operate the blender without dip into the food. Do not operate the machine over
20 seconds when the blender is unloaded. Avoid damage the motor from overheat.
* This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision. Cleaning and user maintenance shall not be made by children unless they are older than 8 and
supervised.
* Keep the appliance and its cord out of reach of children less than 8 years.
* If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
* Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling
or cleaning.
* Do not allow children to use the blender without supervision.
SWITCH KEY
The
switch A
button key is for low speed, the
switch B
button key is for Turbo speed.
* Press any switch key, the machine will work. Loosen the switch key, the machine will stop.
STEPLESS SPEED KNOB
Press down
switch A
button key, turn on the variable speed knob to fast or slow the speed.
If you want the blender move slowly, turn the adjustment for a little.
If you need the blender move fast, turn the adjustment for more.
The
switch B
button key is always in Turbo speed, no matter you turn the variable speed knob or not.
USING THE BLENDING
* The blender is used for mince or mix the food.
* Move the hot pan away from fire and wait until its temperature drop down to be below 70C. To avoid the
housing overheated.
* Set the blender on the housing, screw tightly and lock it.
* Connect to power. To avoid spattering, put the blender into ingredients before switching on the power.
* Hold the mixing cup tightly and push down the switch key. The liquid ingredients you are mixing cannot
