KNOWING YOUR BLENDER
①
- Components list
A.
Measured cup
B.
Lid
C.
Pitcher
D.
Motor unit
E.
Speed button (P,0,1,2,3,4)
F.
Dry mill grinder
②
- Assembly the Pitcher onto machine
③
- Disassembly the Pitcher from machine
INSTRUCTIONS FOR USE
Fit the pitcher onto the motor unit , then lightly wriggle the blender flask until screw in the motor unit
Wash fruit / vegetables first and slice into small pieces
– about 2x2cm
Place the sliced fruit / vegetables into pitcher
Before blending, add desired level of water or liquid mixture into the pitcher. Pay attention that the mass
food fills the pitcher not more than the highest line. You can see the highest standard line marked on the
pitcher
Fit the lid into the pitcher, then screw firmly.
Plug the appliance in and then turn the speed button to 1, 2, position. Please do not operate the blender
more than 3 min.
After blending, please turn the speed button into 0 position. Wait for the motor unit stopping and then
move the pitcher
Move the lid by spinning it in opposite direction, then remove it.
For Grinder Attachment
1
．
Fill materials into the grinder cup, press the grinder cup downward, making sure that pins of grinder
cup can fit the four grooves on the grinder base, and then turn the cup clockwise to fix it.
2
．
Take off the glass mug from the body, install the grinder attachment, making sure the gear under the
mug fix rightly to the transmission gear on the body
3
．
Always keep the grinder cup being pressed downward when operating.
Choose “PULSE” speed for
3-5 times for pre-
grinding, and then choose speed “1”, or “2” to process, user should choose different
