aigo A396+
| 40 |
USB Working Mode
When the USB interface of the frame is connected to a PC (See Figure
6.22), the frame enters USB (USB Slave) mode. At this time, the
computer can directly access the memory card inserted in the frame.
Note: To connect the frame to a computer via USB interface, there should be
no slideshow playback at the point of connection. Stop any photo playback
before the connection to computer.
Figure 6.22
After the USB interface of the equipment is connected to a portable
memory, the system enters the USB Host mode (as shown in figure
6.23)
aigo A396+
| 41 |
Figure 6.23
When in USB Host mode, the USB Flash Disk or other USB Devices
will be named as “UDISK” and displayed in the File List.
Note:
1. To avoid any accident caused by insufficient USB power on the computer,
ensure that the frame is powered ON before connecting it to a computer.
2. To connect an external USB device (eg. Thumbdrive) to the frame, the USB
devices must not be operating on any current of 500mA and above. An
external power supply may be needed when necessary.
3. Supports Windows2000 & XP.
aigo A396+
| 42 |
Troubleshooting Guide
Problem
Possible reasons
Solution
No power indicator
Or no connection
interface.
Power cable connection
problem or machine has
broken down.
Check the
power cable
connection.
Cannot play back.
The card is inserted
incorrectly or card is not
compatible.
Remove and
insert card
again or
format the card
and try again.
Cannot playback
video.
The format of the video is
not compatible or the file is
damaged.
Change
another file and
try again.
Cannot playback
audio.
The file is damaged or the
audio format is
incompatible.
Change
another file and
try again.
After power OFF,
frame cannot save
the time settings
Built-in battery is flat.
Change a new
battery.