3
INSTALLATION
ATTENTION: Installation should be performed by qualified service personnel only, in accordance
with the National Electrical Code or applicable local codes.
3
Wall or ceiling surface
Up if wall
mounted
Horizontal if
wall mounted
6.0
Center-to-center for
trim ring screw holes
7-1/2
Allow clearance
for trim ring
STEP 3
Attach adapter plate to rear of dome.
Use two #6-32 x 3/4 screws supplied
with Recessed Mount Kit.
STEP 2
Install wall bracket and
tighten toggle bolts (see
also
Figure 2
for details).
STEP 4
Connect power and
video leads, then install
dome by attaching adapter
plate to wall bracket.
STEP 5
Attach trim ring to wall bracket
by using the trim ring’s
captive flat head screws.
STEP 1
Cut hole using
included template.
Horizontal
(if wall mounted)
Trim Ring
Mini/VariDome
Adapter
Plate
Fig 1 Installing Recessed Mount Kit
Fig 2 Mounting of Wall/Ceiling Bracket for MLR
