6
5.4 Camera/Lens Installation
1.
Reattach the camera mounting system to the rear panel using
two 6 mm flange nuts.
See Figure 9
.
Figure 9: Securing the Mount System
2.
Secure the camera to the camera mount using one 1/4-20 x
1/2" button head flange screw.
See Figure 10 and 11
.
Figure 10: Camera Mount
5.5 Final Assembly
1.
Mount the cover by aligning the studs with the slots on the
rear panel. Secure using the six flange nuts.
See Figure 12
.
Figure 12: Replacing the Cover
2.
Tighten the left side anchor bolts.
3.
Make final adjustments to the camera and camera mounting
system.
4.
All Models Except HS9303L:
Attach the access panel to the
housing by inserting the latch into the rear panel. Screw the
two tamperproof screws down tight to the cover. If the rear of
the access panel is not tight remove access panel and lower
the latch by rotating it clockwise. Repeat until tight.
See
Figures 13 and 14
.
Note:
Retain special tool for future use.
Figure 13: Inserting the Access Panel
Figure 11: Camera and Mount System
3.
Make all electrical connections to the camera. See individual
camera and lens instructions.
Figure 14: Securing the Access Panel
Mount System
Flange Nuts
Rear Panel
Camera
Camera Mount
1/4-20 x 1/2" Button
Head Flange Screw
Camera
Mounting System
Cover
Latch
Rear Panel
Access Panel
