Fixing and Maintenance Instructions
Ver.9 09/2013 (1510)
4
Fig. 1
Fig. 2
Fig. 3
CLEANING
The Solo Bed Transfer Aid should be cleaned using a non-abrasive cleaner or mild detergent
with a soft cloth. Only use a mild detergent or disinfectant; never use an abrasive cleaner. Do
not exceed 50
o
C. Always ensure that you wipe dry all equipment and treat joints with a water
dispersing agent, e.g. WD40.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
This includes:
•
Tightness of all nuts/bolts/castors and other screw in/bolt in/push in components
•
Upholstery (if applicable) for security, splits, exposed staples, etc
•
Straightness and integrity of all tubing and welds
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
When reissuing, a risk assessment must be undertaken as to the suitability of the Bed
Transfer Aid for the particular user and user’s bed.
IMPORTANT INFORMATION
The Bed Transfer Aid hand grips have been designed to meet the latest MHRA guidelines on
entrapment, however you must ensure that there is no risk to the user or carer after the
installation and service of the Bed Transfer Aid with Strap or without Strap.
Do not allow children or unauthorised persons to play with the equipment or use the bed
transfer aid without proper supervision.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9
3EX
Telephone: +44 (0) 1744 745 020
•
Fax: +44 (0) 1744 745 001
•
Web: www.aidapt.co.uk
Email: [email protected]
•
•
