Assembly and Operating Instructions
Ver. 6 10/2020 (1262)
3
9.
Re-insert the black nuts through the frame and back and secure by turning the
black lock nuts until you feel the nut biting against the leg of the back
Do not over tighten and do not use tools as it is only necessary to have the
back secured finger tight
FOOTRESTS
The footrest for the Bewl Height Adjustable is a one-piece unit with a ribbed P.U. foot mat.
If required the footrest can be carefully adjusted as follows:
1.
Carefully remove the two pin clips holding the footrest in place (see fig. 1)
2.
Move the footrest to the desired position ensuring that the final hole in the
footrest is not exceeded
3.
Check that both sides of the footrests are adjusted equally and carefully reinsert
the pin clips to either side of the footrest, ensuring that the clips pass completely
through the frame and the footrest is securely held in place (see fig. 2)
BRAKED CASTORS
Do not attempt to push the Bewl shower chair with the brakes applied, this will damage the
brake mechanism and may compromise the safety of the user.
NB. Please regularly check the castors and the brakes for proper operation and that
the castors are securely fitted to the chair legs.
