Assembly and Operating Instructions
Ver. 4 01/14 (2286)
3
ii.
The footplates are designed only to support the feet while in the
seated position. DO NOT STAND ON THE FOOT PLATES.
iii.
WARNING: Surface areas of your chair can get hot when the
chair is exposed to external sources of heat (e.g. sunlight).
•
Please now refer to the section on Assembly and use.
ASSEMBLY
1.
First remove all contents from the box.
2.
To open the chair, push seat rails and press downwards until the
chair is fully opened taking care to keep fingers clear of moving parts
(Fig. 1).
3.
To close the chair, take the centre of the seat fabric at the front and
back edges and lift (Fig. 2).
Note: The seat rails must be fully engaged in the seat frame support
brackets before sitting down.
Fig. 1
Fig. 2
Note: When opening and closing your chair please keep fingers well
away from any possible entrapment areas.
The only part of the chair that can be adjusted are the leg rests. Ideally your
knees should be at 90 degrees with the seat. If you are not sure please
contact a healthcare professional or your local dealer for advice.
