aidapt Ecclesfield VG700BMK Quick Start Manual Download Page 9

Fixing and Maintenance Instructions

9

ADJUSTING THE CHAIR (CONTINUED)

WARNING:

 

Please ensure you take care when adjusting chair positions to avoid trapping or 

pinching of body parts.

Only the occupant or a reasonable person should operate the chair adjustments.

Chair should be returned to the seated position when not in use. 

CAUTIONS:

• If the chair does not work properly, please contact the supplier.

• Only trained technicians should attempt repairs.

• There are no user serviceable parts inside.

REMOTE POSITION CONTROLLER UNIT:

• Ensure you do not overstretch the handset cable and that  

   the remote controller unit is not left on the floor.

• When the handset is not in use, this should be stored in the 

 

   pocket located on the side of the chair.

• Use only dry cloth for cleaning of the unit. Excess moisture  

   may damage the controller.

• Avoid  damaging  the  handset  as  this  will  result  in  loss  of 

 

   operation of the chair.

ELEVATING THE LEG REST

By  pushing  the  ‘RECLINE’  button,  the  leg  rest  will  elevate. 

Please note movement can be stopped at the desired height 

by releasing the pressure on the button.

By continuing to push the ‘RECLINE’ button it will recline the 

backrest

WARNING:

 Do not sit on the leg rest. It cannot support weight 

of an adult.

The leg rest is folded away when being used to aid standing. 

LOWERING THE LEG REST

By  pushing  the  ‘RISE’  button,  the  leg  rest  will  lower.  Once 

again the movement can be stopped by releasing the 

pressure button.

From the sitting position, if you continue to push the ‘RISE’ 

button, the chair will slowly begin to rise to enable the user 

to stand. 

SITTING-DOWN AND OR LOWERING THE CHAIR 

From the standing position, by pushing ‘RECLINE’ the chair 

will begin to lower back to sitting positon.

WARNING

 

Please lower the chair with caution as there is 

a risk of entrapment. Ensure there are no children or pets 
underneath the chair when lowering. Also carers should 
stand clear of the chair when lowering.

BUTTON A

Rise

BUTTON B

Recline

Summary of Contents for Ecclesfield VG700BMK












Reviews: