Usage and Maintenance Instructions
Ver. 2 07/2012 (2233)
2
INTRODUCTION
Thank you for deciding to purchase the Scooter Full Weather Protection Cover from
Aidapt. The Scooter Full Weather Protection Cover is manufactured from the finest
materials available. When used correctly it is designed to give many years of
reliable, trouble-free service.
NB. This equipment must be installed by a competent person.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the item.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
This scooter weather cover encapsulates the scooter providing a totally dry
environment for you and the controls. The snug fitting pack-away hood ensures
that your only exposed part has maximum protection.
Providing a dry and safe environment, the tailored front allows the cover to be used
with either 3 or 4 - wheeled scooters, and the clear front improves your safety by
allowing your lights and indicators to be seen whilst being protected.
FITTING INSTRUCTIONS
•
Unzip the neck and side opening fully
•
Put the Cover on over the head and shoulders, like a jumper/sweater
•
Pull the Cover down over the torso and ensure that it covers the back and
front of the scooter
•
(Alternatively, spread the cover over the Scooter ensuring that the back
and front of the Scooter are covered. Unzip the neck and side zip and open
the cover in order to climb onto the Scooter. When seated, lift the cover up
over the shoulders and zip the side section closed.)
•
The neck opening can be zipped up or down as desired and the hood can
be raised and tied for complete weather protection
