8
“Reservation”
, after set your reservation time, click button
“Start / Stop/Pause
”, "
:
"
starts flashing, reservation function is activated, the countdown begins. If you do not
want an appointment, click on
“Start / Stop/Pause”
button, "
:
" starts flashing, bread
maker start working.
★
program 14,15 without the function of
“Reservation”,
but can be adjusted
according to your time, set the time click
“Start / Stop/Pause”
, the time display stops
flashing, which means that OK, and then click
“Start / Stop/ Pause”
, "
:
" Start flashing,
bread maker start working.
★
When on the halfway of bread maker working or reservation, if you want to pause
bread maker, please click on the
“Start / Stop/Pause”
button to hear a beep, the time
display flashes, toaster work suspended; if you want to cancel pause, please Click
again to
“Start / Stop/Pause”
button. If you want to terminate the machine, please
press
“Start / Stop/Pause
” button, you hear a beep, LCD display to its default state,
bread maker work stopped.
5.OPERATING GUIDE
Please be careful before use
：
★
Check wire cord, socket and fuse box in order; Rating Load is higher than 3A.
★
Bread Maker must be grounded in safe. Earth Wire and Zero Line must be separated,
preventing them from twisting in each other over three-plug connector.
Operation Instruction on “Toast”
1. Take out bread barrel from the inside of container and put stirring rod into barrel.
2
．
Add the appropriate amount of water, egg and flour into barrel, and finally add yeast
powder.
Then place the half-round hole of
stirring rod into the right position at
the revolving axle.
Insure yeast powder to be added
above flour and don’t mix yeast
powder with water, sugar and salt,
otherwise the activation of yeast will
be weaken or can’t workable.