AIC TB116-AN, User Manual, Page: 30 / 63

Chapter 2 Hardware Setup
22
TB116-AN User's Manual
2.8.4 Installing the chassis into the cabinet
Insert the inner side of chassis into the cabinet. Check if the ball retainer
is fully opened before installation. It may cause catastrophic damage to
the chassis if ball retainer is not in fully open position while mounting the
chassis. While pushing the chassis back into the cabinet, release the slide
from locking position by pressing the trigger downward.
note :
Very Important- It Requires At Least 2 People To Install The Chassis
For Safety Puropose.
Retainer
2.9.5 Removing the blade slide
Step 1 Refer to 2.9.4 to remove the chassis from the
cabinet.
Step 2 Refer to 2.9.3 to remove the outer cabinet from the
slide rail.
Step 3 Refer to 2.9.2 to remove the inner side rail from the
enclosure.
Step 4 Refer to 2.9.1 to push the inner slide rail into the blad
slide.