AIC SB303-LB, User Manual, Page: 77 / 85

70
&KDSWHU%0&&RQÀJXUDWLRQDQG6HWWLQJV
6%/%8VHUV0DQXDO
5.4 Updating BMC Firmware
1. Boot to the DOS (MS-DOS or Free DOS is workable)
(QWHU%0&ÀUPZDUHGLUHFWRU\> XXXXX Z YY ]; XXXXX : project name ;
YY ÀUPZDUHYHUVLRQ Z ,GHQWLI\FKDUDFWHU&IRURIÀFLDO%IRU%HWD
([HFXWHDEDWEDWFKÀOHWRXSGDWHWKH%0&ÀUPZDUH
Example:
A:>cd
301 C 01
A:\ 301 C 01 >a.bat
7KLVLVMXVWDQH[DPSOH7KHODWHVW%0&ÀUPZDUHYHUVLRQLVDYDLODEOH
from the FAE or AIC website.
$IWHUXSGDWH%0&ÀUPZDUHSOHDVHSRZHURIIDQGWKHQSRZHURQ
system.
Notes:
1. DO NOT USE EMM386 IN DOS ENVIRONMENT WHEN UPDATING
FIRMWARE OR YOU WILL GET A FAIL.
2. IN SOME CRITICAL CONDITION, AFTER UPDATING BMC
FIRMWARE OR CONFIG FILE, YOU MIGHT NEED TO UNPLUG
AC POWER CORD 5 SECONDS AND THEN PLUG AC POWER
CORD TO RESET BMC, THEN UPDATED NEW FUNCTION CAN
WORK PROPERLY.