manualshive.com logo in svg

AIC SB101-LB, User Manual

Share
Download
AIC SB101-LB User Manual Download Page 80

70

Chapter 5. BMC Configuration Settings

SB101-LB User Manual

SMTP Settings

Manage SMTP settings of the device.

SSL Certificate Configuration

This page is used to configure SSL certificate into the BMC. Using this, the device can 
be accessed in a secured mode. Upload SSL option is used to upload the certificate 
and private key file into the BMC. Generate SSL option is used to generate the SSL 
certificate based on configuration details. View SSL option is used to view the 
uploaded SSL certificate in readable format. 

System and Audit Log Settings

Enable and configure logging of system events below. Or you can enable/disable 
logging of audit events. Press the Save button to save your changes. 

System Firewall

Use this page to configure System Firewall settings. 

User Management

The list on the page shows the current list of available users. To delete or modify a 
user, select the user name from the list and click "Delete User" or "Modify User". To 
add a new user, select an unconfigured slot and click "Add User." 

Virtual Media Devices

The following option will allow to configure virtual media devices. Below, you can 
select the number of instances that are be supported for each type of virtual media 
devices. 

Summary of Contents for SB101-LB























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands