AIC HP201-AD, User Manual

Page: 17 / 74

Chapter 2 Hardware Installation
10
HP201-AD User's Manual
2.1.2.4 Remove the Socket Cover. Remove the socket cover from the
load plate by pressing it out.
2.1.2.5 Close the Load Plate. Carefully lower the load plate down over
the processor.
2.1.2.6 Lock down the Load Plate
• Push down on the locking lever on the CLOSE 1st side (see letter A).
Slide the tip of the lever under the notch in the load plate (see letter B).
Make sure the load plate tab engages under the socket lever when
fully closed.
• b.Repeat the steps to latch the locking lever on the other side (see
letter C). Latch the levers in the order as shown.
NOTE :
The socket cover should be saved and re-used should the processor
need to be removed at anytime in the future.
Save the
protective
cover.
A
B
C