10
Chapter 2. Hardware Setup
FB201-LX User Manual
PHM Screw Installation Order:
The PHM sits level with the processor socket assembly. The PHM is NOT installed
properly if it does not sit level with the processor socket assembly. Once the PHM is
seated over the processor socket assembly, the four heat sink torque screws must be
secured in the following order as shown below.
Processor Heat Sink – Top View with Screw Tightening Order
NOTE
Failure to tighten the heatsink screws in the specified order may cause
damage to the processor socket assembly. Heat sink screws should be tighted to 12
in-lbs torque according to the ndicated order on the top of the heatsink label.
All manuals and user guides at all-guides.com