AIC 12Gb/s SAS JBOD Series, User Manual, Page: 54 / 105

45
J4024-01 User Manual Chapter 3. Sub-system Configuration Setup
3.6.4.4 Enclosure Element
(A) Enclosure Control Element
BYTE/BIT 7 6 5 4 3 2 1 0
0
COMMON CONTROL
SELECT PRDFAIL DISABLE RST SWAP Reserved
1
RQST
IDENT
Reserved
2
POWER CYCLE
REQUEST
POWER CYCLE DELAY
3 POWER OFF DURATION
REQUEST
FAILURE
REQUEST
WARNING
Field Value
RQST IDENT Please refer to section “SES Element Control Functions” for details.
REQUEST
FAILURE
Please refer to section “SES Element Control Functions” for details.
REQUEST
WARNING
Please refer to section “SES Element Control Functions” for details.
(B) Enclosure Status Element
BYTE/BIT 7 6 5 4 3 2 1 0
0
COMMON STATUS
Reserved PRDFAIL DISABLE SWAP ELEMENT STATUS CODE
1 IDENT Reserved
2 TIME UNTIL POWER CYCLE
FAILURE
INDICATION
WARNING
INDICATION
3 REQUEST POWER OFF DURATION
FAILURE
REQUESTED
WARNING
REQUESTED
Field Value
ELEMENT STATUS
CODE
OK
IDENT
0: Power LED is solid on
1: Power LED is blinking
FAILURE
REQUESTED
Set by the REQUEST FAILURE on Enclosure Control Element
WARNING
REQUESTED
Set by the REQUEST WARNING on Enclosure Control Element