Ai Hardware AI-BS-WS42, User Manual

Page: 9 / 22

9
/
22
4.10
Wired Output Mode
Function Note
USB Output USB-HID output
Virtual Serial Port
Output
USB-VCP output
Note:The USB VCP needs to be installed with a USB-to-serial port driver for
normal use; window10 does not need to install a driver.
USB output
USB-VCP output
Note
★
:
1.USB output & RS-232 output by default.System will choose USB output or RS-232 output automatically according to
the hardware,no need setup.
2.You need to scan setup barcode when switching between USB ouput and Virtual Serial Port output.
3.If the dock data does not upload, please check whether the connection cable is used correctly, whether the USB device
enumeration is normal, and whether it has entered the upgrade mode.
4.11
Sender End Wired Output Switch
Function Note
Turn on the USB
wired output
The transmitter is connected to the PCB via a USB cable, the data can be directly
transmitted through USB without wireless transmission after turn on USB wired
output.
* Turn off the USB
wired output
The USB cable only use for charging and data only transmitted via wireless after
turn off the USB wired output
Turn on the USB wired output
* Turn off the USB wired output
Note
☆
:USB wired output switch only use for sender end