READY TO FLY?
- The WASP Drone must be switched on first in order to connect to the
remote control. Open the battery cover as shown in page 3
B2
, insert the
battery into the battery compartment as shown in page 3
B3
. Plug the
battery into the socket and close the battery compartment.
- Then set the switch on the WASP Drone to
the “ON” position.
- Before switching on the remote control, the
control for thrust and rotation must point
down as shown in
D1
. You may now switch
on the remote control and move the control
for thrust and rotation upwards for approx. 3
seconds , the WASP Drone activates and is ready
to use.
C1
A pair of landing skids are included with the
WASP Drone. These are to be placed on the
underside of the WASP Drone. Then carefully screw
in the two securing screws in each skid as shown
in
C1
.
INSTALLING LANDING SKIDS
D1
TROUBLESHOOTING
5
