9
AMX-912
A 4 way RCA connector has been provided for connecting a Stereo Cassette Recorder to this audio mixer for Playback
/ Recording. Alternatively, a separate Stereo Cassette Recorder and a Stereo Cassette Player can be simultaneously
connected for Recording and Playback respectively. This facility allows use of the other 9 input channels for connecting
input sources other than a Stereo Cassette Player.
1.
RECORDING Outputs
The Left & Right RCA Sockets marked “REC” carry the stereo mix signal
for connecting to the inputs of a stereo cassette recorder for Recording the
program.These can also be connected to the Aux Input of an additional Monitor
/ Power Amplifier for driving them. The recording output level from AMX-912
is fixed (240mV) and is not affected by the settings of Master Faders and Tape
Gain Controls.
2.
PLAYBACK Inputs
The Left & Right RCA Sockets marked “PLAY” are for connecting to the Play
Output of a stereo cassette player or the same cassette recorder being used
for recording. The playback signals are routed to the main stereo mix of
which the level is set by the Master Faders. However, the level of the playback
mix into the main mix is set by the Gain Control. The input sensitivity of the
Playback Inputs is 50mV. It can be adjusted from 50mV to 1V by the Gain
Control to accept input signal from other sources such as a
CD Player,
Electronic Keyboard, Drum Machine, Electronic Guitars
etc., to this
mixer.
3.
PLAY ON/OFF Switch
A Switch has been provided for switching OFF the playback music source
connected to the mixer.
4. PLAY GAIN Control
A Gain Control is provided to set the Level of playback program to the overall program mix.
THE HEADPHONES SECTION
A Stereo Headphone Output is available through a 1/4” stereo jack for
program monitoring.
Wiring:
Tip
Left Signal
Ring
Right Signal
Sleeve Ground
Do not use Headphones of less than 8 Ohms Impedance.
1.
GAIN Control
A Dual Gain Control has been provided for setting the level of the
Headphone Output.
2.
HEADPHONE Output
An Output has been provided through a 1/4” stereo jack for connecting a
Headphone for monitoring the overall program
l
The Tape Section
1
2
4
3
1
2
