S05E/S06E
8-8
8
Maintenance
2
1
(3) Replace the plugs (8-15/1 and 8-16/1).
(4) Fill in oil via the plug bore (8-15/3) until the oil level
reaches the opening (8-15/2 or 8-16/2).
NOTE
- Information about the quantity of oil is given in the
maintenance plan (chapter 8.4).
- After a few minutes, when the oil level has lowered,
top up the oil until the oil level reaches the marked
level and remains stable.
(5) Replace the plugs (8-15/2 and 8-15/3 and 8-16/2).
8.2.6
Changing the oil in the hydraulic
system
(1) Have an oil pan ready (at least 130 l).
(2) Unscrew the cap of the oil drain (8-17/arrow).
(3) Screw the drainage nozzle with hose from the tool box
(4-1/13) to the oil drain plug.
(4) Remove the cover cap from the hose.
(5) Drain the oil into the drain pan.
CAUTION
Waste oil must be disposed of in such a way that it will not
cause pollution!
(6) Remove the nozzle with the hose and replace the
cover cap on the hose.
(7) Replace the cap on the oil drain.
(8) Change the hydraulic oil filter inserts (section 8.2.7).
(9) Fill in oil into the filler neck (8-18/arrow).
CAUTION
For those loaders which are fitted to run with biodegradable
hydraulic oil (synthetic hydraulic oil on ester basis -
viscosity class ISO VG 46 VI > 180) (designation can be
found on the hydraulic oil tank and on the dashboard), only
this type of oil may be used for oil changes.
Mineral and biodegradable oils must
never
be mixed.
Biodegradable hydraulic oil must be changed every
1000
operating hours
.
Changing the oil type from mineral oil to biodegradable oil
must be performed according to the VDMA 24 569
conversion guidelines!
CAUTION
The service brake must only be operated with mineral oil!
(10) Check the oil level at the sight glass (8-7/arrow).
(11) Close the filling nozzle.
Figure 8-16
Figure 8-18
Figure 8-17
Summary of Contents for AS90
Page 1: ...Maintenance ...