5.4 Data input
Numeric parameters are programmed as follows :
Select the desired function by pressing the
FUNCTION
key
Start programming
by pressing the
PROG
key.
The front digit flashes and can now be changed.
Increment the digit by pressing the
▲
key.
If you overshoot the highest value, you start again at zero.
Decrement the digit by pressing the
▼
key.
If you go below zero, you start again at the highest value (9 or 5).
To change the arithmetic sign press the
±
/
ESC
key at the first digit.
or cancel this input with effect from the second digit
To move forwards to the next digit press the
!
key.
To move back to the previous digit, press the
!
key and hold down.
To terminate programming
After setting the last digit press the
!
key again.
To delete measured values and reset the
programming press the keys PROG and CLEAR.
FUNCTION
PROG
± / ESC
1s
20
ALMEMO
®
8390-2
Display and keypad
PROG
CLEAR
