Universal transmitter 8390-1
cycle are available. The measuring operation can be started and stopped via
the interface.
Date and time-of-day
When the measuring instrument is switched on, the date and time-of-day are
set to 01.01.00 00:00:00. For the purposes of logging a measuring operation
these must be reset each time.
Print cycle
Cyclic output of measured values to the interface can be programmed to any-
thing between 1 second and 24 hours.
Print cycle factor
To avoid excessive data flow the data output of certain channels can, as and
when necessary, by means of the print cycle factor, be restricted or altogether
disabled. It is also possible to summate pulses over longer cycles.
Averaging over measuring point scans
The measured values obtained by scanning measuring points can be averaged
either over a number of measuring points or over one particular measuring
point either for the total measuring time or over the print cycle time. Function
channels are provided for the cyclic output of such average values.
Output
All measured values and programming values are accessible via various inter-
face cables with RS-232, RS-422, optic fiber, or Ethernet interface. Measured
data can be output in list, column, or table format. Files in table format can be
processed directly using any standard spreadsheet software. The print header
can be programmed specifically to the company or application.
An integrated Ethernet connector is available as an option - for direct incorpo-
ration in a PC network.
Networking
The transmitter is addressable and can be networked - even over long dis-
tances - via ALMEMO
®
network distributors.
Software
Each ALMEMO
®
Manual is accompanied by the AMR-Control software packa-
ge, which can be used to configure the measuring instrument and to program
the sensors. It is also possible using the integrated terminal to perform measu-
ring operations online and to save the measured values to PC. The WIND-
OWS
®
software package, WIN-Control, can be used for data acquisition with
graphical presentation and complex data processing.
page 6
