Ahlborn ALMEMO 204, Operating Instructions Manual

Page: 25 / 72

Menu selection
10. MENU SELECTION
The menu selection screen offers three measuring menus (s. 9.1) .
1. M Sensor list s. 11.1
2. M Meas. points list s. 11.3
3. M U2 Data logger s. Fehler: Verweis nicht gefunden, 13 plus
4. a series of
F Function menus
s. 14
and 3 Programming menus :
5. P Sensor programming s. 15
6. P Device configuration s. 16
7. P Output modules s. 17
if available
To display the most important information regarding the device INF0
Here, when submitting questions, you can find
the exact device type together with its firmware
version, options, and serial number. Any sensor
can be selected by pressing
▲ / ▼
and identi-
fied on the basis of its order number (if avail-
able). To determine the power supply require-
ments both the battery voltage and the sensor
voltage can be displayed. You can obtain any
other help you might need at our WEB address.
Having accessed the
Sensor list
with its display
of all connected sensors, you can use keys
▲ /
▼
to select one particular sensor; from here
there are three possibilities.
1. With key
<M
◄◄
>
you can access the universal
measuring menu
Sensor display
(s. 11.1).
2. With key
<KONF>
you can access the Sensor
configuration menu, specially provided by the
selected D6 or D7 sensor for the purpose of
programming its individual measuring ranges
and parameters (s. 15.10).
3. With keys
PROG
or ► you can open the
Sensor channels
menu with its
display of all channels available to the sensor selected. Here, similarly, if a
particular channel is selected, you can access the
Sensor display
(with
<M ◄◄ >
) or sensor programming (with
<P ► >
) (s. 15).
ALMEMO ® 204 25
V7 ALMEMO 202
V: A202 7.12 Option: KL
Serial-No: H12040607
Sensor-No: 0: FHAD46 6.67
Meas. channels: V5: 08 D7: 03
UBat: 4.1 V Us: 9.1 V
www.ahlborn.com
Mªª MENU M
M* Sensor list-display ©
M Meas. points list
M U1 Process control
F Function menus FCT
P Sensor programming
P Device configuration
P Output modules
INFO Mªª F © *ON