Ahlborn ALMEMO 204, Operating Instructions Manual

Page: 23 / 72

Function selection
9.4 Function selection
Each menu comprises a number of functions; these
may have to be activated or programmed during op-
eration.
In conjunction with certain functions a context-sen-
sitive
help window will appear.
To select a functions press:
PROG
The first modifiable parameter is highlighted in inverse font:
25.45
Help is provided by the softkey symbol:
<F>
(for function selection)
To jump forward to the next function press:
 or  ...
Depending on function the keys
F1
,
F2
and
◄ , ► are assigned the desired meaning, e.g.
Set measured value to zero
<ZERO>
Adjust measured value
<ADJ>
Delete the maximum / minimum value
<CLR>
Clear value memory
<CLRM>
Clear memory card
<CMEM>
Set a parameter directly
<SET>
Cancel the function
<ESC>
9.5 To enter data
When a programmable parameter is selected its current value can be cleared
or reprogrammed directly (s. 9.4).
To
delete a programmed value press:
< CLR >
To program a value press:
PROG
You should now be in programming mode :
<P>
in the middle of the softkey bar
The cursor flashes below the first input position
Base value: 0025.0 °C
To increment the selected digit:

...
To decrement the selected digit:

...
To change the arithmetic sign of a numeric value:
< +/- >
To move forward to the next position:

The cursor now flashes below the second position
Base value: 0025.0 °C
To move back to the previous position:

Each position is programmed just like the first

/

...,

To save and exit:
PROG
To cancel without saving:
<ESC>
When entering a series of alphanumeric characters select the appropriate
ALMEMO ® 204 23