AHA Smart Pass FPS-1000R, User Manual, Page: 32 / 36

32
How to assemble the main unit and the table stand
The table stand has a cover, non-slip foots (Foot x 3ea),
and screws (M3 x 3ea) on the bottom surface.
1
Table stand
Separate the foots and screws from the bottom of
the table stand to dissemble the cover and table
stand.
2 Disassemble the table stand
Put the cables in the hole of the stand and
insert the main unit into the hold of the stand
and fix the
3
The main unit and stand assembly
FH M3*6 SCREW x 3
STAND FOOT x 3
Connect the LAN and DC Jack
of the stand to the main unit
and close the stand cover and
fix the cover with the screws
and the stand foots.
Pull USB and other terminals
out of the center hole of
4
Cable connection