LED Interactive
Setup Manual
CSLED-84
Thank you for purchasing your AHA Interactive LED display. To ensure safe and stable operation of
this product, please read and follow all instructions and precautions carefully. If you encounter any
difficulties or faults in operation or quality, please contact your AHA dealer immediately. More
information about AHA and our products can be found at www.ahatouch.com.
Record your display’s Model and Serial numbers.
They can be found on the rear of the product and are helpful in reporting loss, theft, or service issues.
Dear AHA Customer
IMPORTANT :
1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
REMEMBER TO :
Do not use this product near water. Do not install the product in a place where water can splash onto it or
near devices such as air conditioners where water may accumulate.
Clean only with a dry or damp cloth. Avoid spraying aerosols or liquids directly on the product.
Do not use accessories or attachments that have not been recognized by the manufacturer.
When mounting the product, follow the installation instructions recommended by the manufacturer.
Do not block any ventilation openings. Install the display in a well-ventilated area or cabinet. Ensure that
proper ventilation is available, as insufficient ventilation will shorten the product’s lifespan.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
1.
2.
3.
4.
5.
6.
Important Safety Precautions
Model No. :
Serial No. :
This manual is to be used for the installation of your AHA interactive display. Operational manuals
and software can be found on the CD-ROM provided with the display, or at the AHA website
www.ahatouch.com. Adobe Reader is required to read all files.
After removing the product from its
packaging, firmly grasp the handle and
bottom bezel to move as shown
in the picture below.
- Keep the product horizontally level to
move stably.
- Do not lift from the very edges of the
bottom of the product.
- 2 -
- 3 -
- 4 -
Do not remove the housing or blades of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Route the power cord so that it is not walked on or pinched. Make sure the cable is uninterrupted at
receptacles or power bars and at the point where it exits from the display.
Move and mount only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the product. Be careful moving cart/apparatus combinations to avoid injury from tip-over.
This product’s screen is made of glass, and it may break if dropped or struck with significant force. Use
caution if the screen breaks to avoid injury due to broken glass.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Do not overload the receptacle or power cord the product has been connected to. This can cause strain
on equipment and create a risk of fire or electrical shock.
Never insert liquids or objects into vents or holes in the display. This can damage the product’s internal
components and high voltages produce risks for injury.
Do not service the product by yourself. Due to the nature of the product the risk of personal injury is high.
Refer all service to qualified service personnel.
Seek repair by a professional in any of the following conditions. Be sure to unplug the display from its
power source.
a. When the product was exposed to liquids or foreign objects.
b. When the power cord or plug is damaged.
c. When the product does not operate properly in either touch performance or picture
display. Do not attempt to adjust controls beyond those described in the instructions, as
this may cause damage.
d. When the product has been dropped or damaged
To completely disconnect this apparatus from its AC power source, disconnect the power cord from the
AC receptacle.
Conduct a safety inspection after installation or repair to confirm that the above precautions have been
adhered to.
The nature of this product is such that it should not be used as a means of industrial control, medical life
support control, or weapons systems control.
Use the cables provided with this product, and be sure that other cables used are properly shielded.
Note: Prolonged use of the display at high volume may cause damage to your ears.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
This symbol is intended to alert the user to the presence of un-insulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be
disposed of with other household waste at the end of its working life. To prevent
possible harm to the environment or damage to health from uncontrolled waste
disposal, please separate this from other types of waste and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial wastes
for disposal.
Note
•
Please make sure the following items are included with your LED Display.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items or extras.
Important Safety Precautions
Turning Power ON/OFF
1) POWER
Turns the LCD Display On/Off.
2) LED
Shows Power ON mode -- BLUE
Shows Power Saver mode by blinking RED.
Shows Power OFF mode -- RED.
3) SOURCE (INPUT)
Switches from PC mode to Video mode.
Changing the source is only allowed for external devices that are connected to the LCD Display
at the time.
4) IR Sensor
Aim the remote control towards this spot on the LCD Display.
Components List
Manual :
Cables :
Others :
Option :
Remote Control
Pen Tray(AHA-P300)
Pen Tray(AHA-P400)
Battery(CR-2025x1, 3V) PEN x2
USB For Touch
RGB
Setup Manual
Operation Manual(CD)
LED Display
Power Cable
1
2
3
4
x2
x14
x2
x14
