background image

6

CONGRATULATIONS

  on your pur chase 

of a new tractor.  It has been designed, 
en gi neered and man u fac tured to give 
you the best pos si ble de pend abil i ty and 
per for mance.
Should you experience any problem you 
cannot easily remedy, please con tact 
your nearest authorized service center/
department  We have competent, well-
trained tech ni cians and the prop er tools to 
service or repair this trac tor.
Please read and retain this manual.  The 
instructions will enable you to as sem ble 
and maintain your tractor prop er ly.  Always 
observe the “SAFE TY RULES”.

CUSTOMER RE SPON SI BIL I TIES

•   Read and observe the safety rules.
•   Follow a regular schedule in main-

 tain ing, caring for and using your tractor.

•   Follow the instructions under “Main te -

nance” and “Stor age” sec tions of this 
own er’s manual.

WARNING:  

This tractor is equipped 

with an internal combustion engine and 
should not be used on or near any unim-
proved forest-covered, brush-covered or 
grass-covered land unless the engine’s 
exhaust system is equipped with a spark 
arrester meeting applicable local or state 
laws (if any).  If a spark arrester is used, it 
should be maintained in effective working 
order by the op er a tor.
In the state of California the above is 
required by law (Section 4442 of the 
California Public Resources Code).  Other 
states may have similar laws.  Federal 
laws apply on federal lands.  A spark ar-
rester for the muffl er is available through 
your nearest authorized service center/de-
partment  (See REPAIR PARTS section of 
this manual).

PRODUCT SPECIFICATIONS

Gasoline 1.25
Capacity and  

Unleaded 

Type:  

Regular

Oil Type 

SAE 30 (above 32°F)

(API-SG-SL): 

SAE 5W-30(below 32°F)

Oil Capacity: 

3 Pints

Spark Plug: 

Champion RC12YC

(Gap:  .030")   

Ground Speed (MPH): 
 Forward:  1st 

 

1.1 

   2nd 

 

1.4 

   3rd 

 

2.2

   4th 

3.3

   5th 

4.4 

   6th 

4.9 

 Reverse:   1.4 

Tire Pressure: 

Front: 

14 PSI 

   Rear: 

12 

PSI 

Charging  

3 Amps Battery

System:  

5 Amps Headlights

Battery: 

Amp/Hr:         28

 

 

Min. CCA:    230

 

 

Case Size:  U1R

Blade Bolt Torque: 27-35 Ft. Lbs.

Summary of Contents for AG17542STB

































Reviews: