
Key Specifications
Construction:
304 Stainless Steel -- corrosion protection -- no chrome
Electrical:
Tested and certified to comply with AS/NZ: 60335 and c-tick requirements
IP55 Rated:
Water splash and spray proof
Power supply:
220-240 Vac. 50/60Hz
Approval:
CE, EMC(C-Tick), LVD, RoHS, SAA(AS/NZ 60335), PSE(J60335-1), IP55
Note: This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
§
Eliminate choking and suffocation hazards for young children by removing and safely
discarding all protective packaging and the protective cover on the power plug.
§
This appliance operates at a room temperature that is hot but not scalding to touch (up to
55
°
C). Rises in ambient temperature and the insulation effect of towels can cause the
operating temperature to rise. Young children and infirm persons should be supervised
near this appliance.
§
Do
NOT
use this towel rail to dry clothing or articles that have been in contact with oil,
petroleum based products, or dry cleaning fluids.
§
Use this appliance
ONLY
on the voltage specified on its electrical specification label.
§
Do
NOT
use this appliance other than for its intended use.
§
IPX5 rated to withstand water splashes and sprays. Do
NOT
immerse in liquid.
§
Do
NOT
allow the power supply cord to come into contact with any heated surfaces.
S
A
FE
T
Y
&
C
A
U
T
IO
N
IMPORTANT: Retain this
instruction booklet for
future reference
Important Safeguards
Copyright 2018 Aguzzo
Aguzzo
©
is a brand member of the Vanguard Design Group
§
Carefully read all instructions before installation and operation
§
If you are hard-wiring or connecting to switch/controller. this appliance
MUST
be installed
by a qualified and licenced electrician in accordance with relevant wiring rules (AS/NZ
3000:2000 in Australia and New Zealand)
§
It
MUST
be installed so the bottom rail is at least 600mm from the floor
§
It
MUST
be installed at least 1.7 metres from combustible materials such as drapes and
furnishings
§
The appliance is supplied with an earthed 3-core supply cord and plug. This cord and plug
MUST
be positioned so it is not subject to splashing water or ingress of moisture
§
Install with a suitable switch or controller:
- Plug into a power point with a switch
- Hardwire to a wall switch
- Hardwire to a compatible controller (such as a timer or thermostat switch)
§
Do
NOT
install or operate with a damaged cord or plug
§
Do
NOT
cover the cord and ensure it is arranged so it does not pose a risk
§
Do
NOT
install outdoors
Installation Requirements