9.
To view a recording and display the GPS track, click on the ‘Search Directory’ button and browse your computer until you find your
DX20 displayed as a ‘Removable disc’ (You should find it in the ‘My Computer’ or ‘This PC’ directory of your PC if connected correctly)
Double click on the ‘Removable disc’ folder and select either ‘Event’ or ‘Normal’ and press ‘OK’ to import the files in to the DX20
Viewbox software. The video/GPS track files recorded will appear in the two data lists at the bottom of the Aguri DX20 Viewbox as
indicated above. Highlight the video file you want to run and press the Play button or simply double click the video file you want to
review to launch it.
Video recording settings.
If you would like to fine tune any of the settings on your DX20, follow the instructions below.
Enter the Menu by pressing button #1, the Menu/Return button and then press the ‘Up’ or ‘Down’ buttons to scroll through the video
settings.
Resolution
To change the Resolution, enter the Menu and use the ‘Up’ or ‘Down’ buttons until you highlight ‘Resolution’ and press the ‘OK’ button
to select. Use the ‘Up’ or ‘Down’ buttons to choose between 1920*1080P 30fps 16:9 / HDR 1920*1080P 30fps 16:9 / 1280*720 60fps
16:9 or 1280*720 30fps 16:9. Press the ‘OK’ button to make your selection and return to the menu.
To exit the menu, press the Menu/Return button, button #1.
User tip. The higher the resolution selected the more memory required to save and store lengths of video. If you want to store more
video on one SD card, try reducing the resolution.
Recycle Record/Loop recording
You can adjust the length of each loop of video recorded.
To change the Loop time, enter the menu and highlight ‘Recycle Record’. Select it by pressing the ‘OK’ button and use the ‘Up’ or
‘Down’ button to choose between 1 minute, 3 minutes, 5 minutes or Off. Press the ‘OK’ button to save your selection and return to the
menu.
To exit the menu, press the Menu/Return button, button #1.
