10 /24page
6. Cleaning and Disinfecting
The following cleaning procedures should be performed daily or as
needed when the device is being used regularly; failure to properly
clean your unit may result in clogging and shortened product life.
-
Carefully separate the tip and head from the device housing.
-
Unscrew the collection cup from the head module.
-
It is also suggested that the rubber seal inside the module head be
removed for cleaning and to help ensure the unit is fully dry before
use and to prevent the growth of bacteria.
-
It is recommended at the that the silicone tip and collection cup be
at minimum rinsed well with hot water between uses to prevent
mucus from drying and clogging the unit. To Clean (at the end of
the day / as needed)- Wash the collection cup and tip with mild,
non-abrasive soap and water. To Disinfect (after an illness / as
needed)- After cleaning the pieces, boil the tip and collection cup
for 3~5 minutes; should not boil the head module.
-
