https://www.agrotkindustrial.com/
P17
OPERATION INSTRUCTIONS
Pic.7
7) After placing the balanced lead, press
key to rotate the wheel. If the operation is correct,we
will see pic. 8. It indicates that the balancing was successful.
Pic.8
3. ALU
-
S balance mode
(Automatic input gauge is optional function .No automatic gauge
please enter manually)
★
This function is applicable to very special rims, and the normal alu-1 and alu-2 methods cann't
guarantee sufficient balance accuracy. Choose this balance mode.
1) Input aI, aE, d value
●
aI distance”value: Pull out the ruler head as it is shown in pic. 9 first and hold it at F1 position for 4
seconds, automatically read the "aI distance" data from the measuring scale, and manually correct the
data through input
(automatic measurement is optional).
●
AE distance " value: pull out ruler head as it is shown in pic. 9 first and hold it at FE position for 4 seconds, and
automatically read the" aE distance "data from the measurement scale, and manually correct the data through
input
(automatic measurement is optional).