OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
93
Fig. 98
4.10
DESCRIPTION OF DEVICES FOR USING THE TRACTOR ON THE ROAD
The position of devices on the tractor is shown in the figure. To turn the lamps on and off, refer
to the chapter “Tractor console”.
1.
Front headlights
2.
Position lights
3.
Front direction indicators
4.
Rear stop and position lamp
5.
Rear direction indicators
6.
Reflectors
7.
Plate lights
8.
Rotating lamp (optional)
9.
Rear-view mirrors
IMPORTANT:
Before making the connection, check that the system of the
trailed implement is suitable for the operating pressure of the tractor.
IMPORTANT:
Always make sure the pressure is released before performing and
work on the hydraulic system. To do this, shut down the tractor and depress the
brake pedal several times.
WARNING:
Before disconnecting the trailed implement, always apply the
parking brake and place safety wedges to secure it against moving!
WARNING:
When transporting a trailed implement, both brake pedals must be
mechanically connected with a pin!
Summary of Contents for AGT 106
