OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
44
Fig. 43
4.6
DESCRIPTION OF THE REAR HYDRAULIC LIFT MECHANISM
As standard, the tractor is equipped with a category I three-point linkage system for pulling
implements. The three-point linkage system basically consists of two lower link arms and a top
link.
Lower link arms are connected to lift arms through adjustable lift rods, which are controlled by
two single-acting hydraulic cylinders.
On both sides of lower link arms, there are two lateral tensioners for limiting the transverse
movement of the three-point hitch when tractor mounted implements are in a raised position.
Articulated connections of all the components of the three-point linkage system allow movement
in all directions.
Description of the main components (see Fig. 43)
1.
Hydraulic cylinder
It is used to control the rear three-point lift mechanism.
2.
Lower link arms
They allow for the connection of different implement types.
3.
Top link
For connecting the third point of the implement.
4.
Lift arms
For lifting and lowering the three-point lift mechanism.
5.
Lateral tensioner
For limiting the horizontal movements of the three-point lift mechanism.
6.
Vertical tensioner
It is height-adjustable and connects the lift arms to the lower link arms.
7.
Rear hydraulic connections
They are fitted with quick couplings for connecting the implement to hydraulic system.
Summary of Contents for AGT 106
