Agromatic NEx Series, Assembly And Operating Manual, Page: 98 / 112

9.2 Dismantling and disposing of the actuator 9 Decommissioning, disassembly
92 Actuators NEx, NEx-K, NEx-KA, NEx-V
9.2 Dismantling and disposing of the actuator
When the actuator has reached its end of service life, it must be dismantled
and disposed of in an environmentally friendly manner. The general, legal
and otherwise binding regulations regarding the prevention of accidents and
the protection of the environment in force in the country of use (e.g. the na-
tional regulations of the professional associations for occupational safety and
health) must be adhered to.
WARNING
Incorrectly placed or improperly attached components can drop
down and cause personal injuries.
–
Always wear industrial protective clothing, safety shoes and where re-
quired protective gloves when working on the equipment.
–
Secure the components e.g. with ropes or the like against dropping
down before dismantling the actuator.
NOTE
Environmental harm hazard due to incorrect disposal
Electrical scrap, electronic components, lubricants and other process
materials must be treated as hazardous waste and may be disposed of
only by approved specialists.
−
Dispose of the actuator components, separated by material, in an envi-
ronmentally friendly manner.
Observe the environmental protection regulations in force in the country of
use.
−
Dispose of greases and oils according to the waste oil ordinance locally in
force.
−
Transfer the dismantled components to the recycling process:
−
scrap metals,
−
Send plastics to an appropriate recycling yard
−
Separate other components by material and dispose of them properly
Important information!
You may alternatively return the actuator to Agromatic Regelungstechnik
GmbH for disposal.