background image

 

10 

1. INTRODUCTION 

 
 

The warranty certificate MUST be returned within 15 days of delivery of the 

machine to the final user. 

 

 
You have just taken ownership of your AGRISEM machine. It has been designed to give complete 
satisfaction. 
 
The equipment has been carefully designed using the latest technological solutions to reduce usage 
costs. 
 
However, for the best and most cost-effective use of your AGRISEM machine, please read this 
manual carefully before starting it up and strictly follow the instructions. In particular, follow the 
instructions for adjusting and servicing the machine, as well as the safety precautions, very carefully. 
 
Please contact our distributor for any information or advice. 
 
The instructions in this user manual must be read and applied by any persons who will be carrying out 
work on or with the machine, in particular: 

-

 

Use of the machine (including preparation, repairs required during work and maintenance). 

-

 

Maintenance (servicing and inspection). 

-

 

Transport. 

 
AGRISEM INTERNATIONAL cannot be held liable for personal injury or damage to equipment and 
malfunctions resulting from failure to comply with the instructions given by the manufacturer in this 
manual. 
 
This user manual is an integral part of the machine and must always be kept with the machine, 
especially in the event of resale. 
 
AGRISEM INTERNATIONAL is constantly seeking to improve its products and reserves the right to 
modify or improve its products with no obligation to apply these modifications or improvements to 
products already on the market. 
 
The instructions in this manual are not exhaustive and cannot cover all eventualities.  The user must 
comply with the applicable legislation, in particular with regard to safety, ensure that the rules of safety 
and caution dictated by the situation are applied, use common sense and adapt the use of the 
machine to the circumstances. 
 
It is the Purchaser’s responsibility to check that the AGRISEM machine complies with the legislation 
and regulations applicable to its final destination. 

Summary of Contents for VIBROGERM























































Reviews: