32
2.1.4. Starting up the MOUNTED MAXIMULCH
The tool's tilt during work is adjusted by adjusting the top link "A".
The AGRISEM Multistop allows you to adjust the working depth using the roller.
2.1.4.1
Adjusting the working depth:
Adjustment
: CHANGING THE ROLLER'S POSITION
Changing the roller's position to increase the working depth:
1. Raise the machine into "Transport" position to release the roller
arms' pressure on the multistop upper stop pins.
2. Place the multistop upper stop pins in a
higher
position. (e.g. if the
pins are in position 4, the pin must be put in position 5).
Changing the roller's position to decrease the working depth:
1. Raise the machine into "Transport" position to release the roller
arms' pressure on the multistop upper stop pins.
2. Place the multistop upper stop pins in a
lower
position. (e.g. if the
pins are in position 5, the pin must be put in position 4).
RECOMMENDATION: If this is permitted by the working position, immobilise the roller arms using the
lower stop pins. This prevents friction between the roller arms and the multistops that might otherwise
cause premature wear.
AGRISEM MULTISTOP
W
IT
H