41
1. Review the Operator's
Manual for the engine.
2. Place all controls in
neutral, stop engine
and remove ignition
key before maintain-
ing.
3. Allow the engine to
cool before changing
the oil. Hot oil can
cause burns if it con-
tacts exposed skin. It
is best to change oil
while the engine is
warm to keep the con-
taminants in suspen-
sion.
4. Place a pan under the
drain plug.
5. Remove the drain and
allow the oil to drain
for 10 minutes.
6. Install and tighten the
drain plug.
7. Dispose of the used
oil in an approved
container.
8. Remove engine oil
filter.
9. Apply a light coat of
oil to the O ring and
install the replacement
filter. Snug up by
hand and then tighten
another 1/2 turn.
10. Fill the crankcase with
specified oil.
11. Run the engine for 1-2
minutes and check for
oil leaks.
6.2.2 CHANGING ENGINE OIL AND FILTER
Fig. 35 ENGINE (FRONT)
a Drain Plug b Oil Filter
Fig. 36 ENGINE (REAR)
Fill
12. If leaks are found around the drain plug or
filter, tighten slightly. Repeat step 9.
13. Check engine oil level. Top up as required.
a
b