3 Safety
•
The product may only be installed by a qualified person.
•
Product installation must satisfy the current applicable standards.
•
Switch off the power supply before commencing installation or maintenance work.
•
Do not open or disassemble the product. Opening the product can prove hazardous and
will void the warranty.
•
If connected, the product or its components are powered by a 230V power supply.
•
Never look directly into the light source after connection to protect your eyesight.
•
Wait at least 30 minutes after switching off the fixture before you replace any
components, e.g. the led driver. The parts can be hot.
•
Make sure that the power cord/box and the lamp cord are connected properly.
•
Never suspend a fixture by its power cord or power cable.
•
Do not plug or unplug a lamp cord/cable while the fixture is switched on.
•
The fixture lens must not be removed as it may damage the sealing. Removing the
fixture lens will terminate the product warranty.
•
Do not plug this system into a supply voltage other than indicated on the fixture label.
•
The end user is responsible for the proper installation and product use. An incorrect
installation may result in product damage or shortcomings. The warranty will become
void, if the product and/or electronic components are damaged due to an incorrect
installation.
AGRILIGHT B.V.
Safety 10
