10/02/10
Page 25 of 48
AWR100 Manual
5.7 Switch off time
The AWR is switched off after a certain time automatically, if no action has
taken place (e.g. transponder reading or menu access). The switch off time is
configurable between 5 and 600 seconds with the configuration software (see
chapter 6.9.1.3 – “Extra Settings - Timeouts”). The default time is 10 seconds.
5.8 Show Tag time
The time for displaying the ID of a read tag (or for displaying events) can be
configured between 1 and 60 seconds. This setting is called “Show Tag Time”,
the default value is 5.
Show Tag Time
984 010900316360
F 12:41:26
Press key
5.9 Battery
management
Symbol
Meaning
solid
The battery is charged completely
Æ
100 %
solid
Battery capacity is appr. 80 %
solid
Battery capacity is appr. 60 %
solid
Battery capacity is appr. 40 %
solid
Battery capacity is appr. 20 %
solid
Battery capacity is appr. 10 %
blinking
Battery is down to appr. 5 %
The blinking symbol indicates that the battery should be replaced or
recharged soon.
If the AWR detects a too low voltage, the following information appears on the
LCD display:
Low battery
After displaying the information the Stick Reader is switched off automatically.
The AWR offers internal trickle charging. A complete charging cycle can take up
to 20 hours (longer charging time is allowed). For rapid charging, an external
battery charger is available. For the normal operation and internal trickle
charging, only the delivered 12V power supply has to be used. If the voltage of
the used power supply is too high, the following information appears on the
display directly after power on:
Warning
High voltage!
After displaying this information, the reader is switched off automatically.
