16
agria
Brush Cutter 8000
3
3. Devices and Operating Elements
3.5 Mowing Drive
The mowing mechanism is driven by use of a V-belt gearbox and V-belt clutch.
Switching is made through the clutch lever (A/1) on the steering bar.
The mowing mechanism consists of a cutter blade and is equipped with a cutter
brake -safety fitting-.
The blunt blades can be sharpened and slight bending corrected. Replace badly
damaged or bent knife by a new one.
W
Only operate the brush cutter if all knives are correctly fitted and
tightened into place and if all protective coverings and safety fittings
have been placed into the safety position and are in working order!
0
0
A/2
A/1
A/3
3.6 Switching to Mowing
The mowing drive is switched on by pulling the
clutch lever (A/1) on the steering handle.
The clutch lever is fitted with a locking strap to
prevent unintentional engaging. Before pulling the
clutch lever (A/1) the locking strap must be
pressed down.
The mowing drive is switched off by releasing
the clutch lever (A/1) - safety fitting - and is within
a short time braked by the cutter brake.
3.7 Switching to Travelling
The travelling drive is switched on by pulling the
clutch lever (A/2) on the steering handle.
The travelling drive is switched off by releasing
the clutch lever (A/2) - safety fitting.
3.8 Shifting yoke
Both drives can be switched on together using
the shifting yoke (A/3).
Before switching on press the locking strap on
the clutch lever (A/1) for mowing drive.
On releasing the shifting yoke (A/13) the mowing
and travelling drives will be switched off.