background image

12

Cleanstar Sweeper

1. Safety Instructions

1

Before you dispose of opened and
seemingly empty pressurised tins (e.g.
of assist-starting liquids) make sure they
are completely empty. Empty them in
ventilated places safe from spark forma-
tion or flames. If necessary, dispose of
tins in hazardous waste deposits.

Be careful when draining hot oil, dan-
ger of burns.

Make sure oil is of specified quality. Stor-
age is in approved cans only.

Dispose of oil, greases, and filters sepa-
rately and properly.

Tyres and
Tyre Air Pressure

When working on tyres, make sure
sweeper is parked properly and secured
against rolling off.

Any repairs are to be carried out by
trained mechanics only and with the
appropriate tools.

Regularly check tyre air pressure.

Excessive pressure may cause bursts.

Use appropriate tyre air pressure when
mounting weights or implements.

Electrical System and
Battery

Persons having a pacemaker must not
touch live parts of ignition system when
the engine is running.

Explanation of
Warning Signs

Before any cleaning, maintenance, and
repair work switch off the engine and
pull spark plug connector.

With engine running, keep at a safe dis-
tance. Dirt and stones may get airborne
during sweeping. People and animals
must keep out of this area.

Signs

When working with the ma-
chine, wear individual protec-
tive ear plugs.

Wear protective gloves.

Summary of Contents for 6100 comfort

















































Reviews: