5500 CT
Quick start guide
5500 644 Page 6 of 7 998 592a_GB 08.10
Coupling and decoupling Implements
Mount and dismount attachments only with engine switched off !
PTO shifting
Shifting PTO requires pulling the clutch! Do not shift the PTO by force or without pulled clutch!
If necessary pull and release the clutch to bring the gears in easy switchable position!
1. Disconnect PTO shaft (attachment)
= move lever (4) to pos. “0”
2. Ensure clean surfaces
Slide pegs (2) of tool carrier
into hooks (3) of attachment
make sure attachment is properly
centred and flat fitted
Fold both eye bolts (1)
over coupling flange
tighten cap nuts evenly
Connect fork end of shift rod
and shift lever with screw and bolt
(do not pull tight for free move)
To disconnect PTO shaft,
pull lever
To connect PTO shaft,
push lever
