background image

3

SAFETY

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise 
caution at all times, when using power equipment.

 

Read and follow all instructions in this manual before attempting 

to assemble or operate this equipment.  Failure to comply 

with these instructions may result in personal injury. Keep this 

manual in a safe place for future reference and for ordering 

replacement parts.

  Read this operating and service instruction manual carefully. 

Be thoroughly familiar with the controls and proper use of this 

power vacuum.

•  Read the vehicle owners manual and vehicle safe operation 

rules before using this equipment.

•  Never  allow  children  under  16  to  operate  this  Mow-N-Vac. 

Children 16 years and older should only operate under close 

parental supervision.

•  Do not allow anyone to operate this equipment without proper 

instructions.

•  Do not allow passengers to ride on this equipment or on the 

towing vehicle. 

•  Keep the area of operation clear of all persons, particularly 

small children. Also keep area clear of pets.

•  Check fuel before starting engine. Do not fill fuel tank indoors, 

or when engine is running, or while engine is hot.  Wipe off 

any spilled fuel before starting engine.

•  Engine and muffler get hot. Do not touch! To avoid fire hazard, 

keep clean of debris and other accumulations.

•  Never store Mow-N-Vac with fuel in tank. Allow engine to cool 

before storing in any enclosure.

•  Do not change engine governor settings.
•  Do  not  operate  engine  if  air  cleaner  or  cover  is  removed, 

except for adjustment. Removal of these parts could create a 

fire hazard.

•  Keep hands, feet, face, long hair and clothing out of inlet and 

discharge area. There are ROTATING BLADES inside these 

openings.

•  Before cleaning, repairing or inspecting, make certain all moving 

parts come to a complete stop. Disconnect spark plug wire 

and keep wire away from plug to prevent accidental starting. 

Keep throttle control lever in stop position.

•  If the Mow-N-Vac should become blocked with debris at any 

point, shut engine off and wait until the impeller comes to a 

complete stop before attempting to remove the obstruction. 

Disconnect spark plug wire to prevent accidental starting.

•  If the cutting mechanism strikes a foreign object, or if your 

Mow-N-Vac should start to vibrate abnormally, stop the engine 

immediately, disconnect the spark plug wire and move the wire 

away from the spark plug. Allow the machine to stop and take 

the following steps.

 

 a.  Inspect for damage.

 

 b.  Repair or replace any damaged parts.

 

 c.  Check for loose parts and tighten to assure 

 

      continued safe operation.

•  Check all bolts for tightness at frequent intervals to help insure 

safe operation.

•  Check vinyl hard top boot frequently for wear. Replace if worn 

or damaged.

•  Never operate Mow-N-Vac unless deck adapter, hose, hose 

adapter (nozzle), discharge chute (elbow), and top cover are 

properly attached in their place.

•  Do not remove top cover or attempt to empty contents of cart 

while engine is running.

•  Never attempt to change hose adapter (nozzle) or to install 

remote hose attachment when engine is running.

•  Keep all shields and guards (e.g. discharge chute (elbow) and 

hose adapter (nozzle) in place and securely attached.

•  Always wear safety glasses or other suitable eye protection 

when operating or maintaining this equipment.

•  Do  not  stand  behind  cart  in  exhaust  discharge  area  while 

engine is running.

•  Do not operate this equipment while intoxicated or while taking 

drugs or medication that impairs the senses and reactions.

•  When using this equipment, start with the vehicle transmission 

in first (low) gear and then gradually increase speed only as 

conditions permit.

•  Operate this equipment at reduced speed on rough terrain, 

along creeks and ditches and on slopes to prevent tipping or 

loss of control. Do not drive too close to a creek or  ditch.

•  Vehicle braking and stability are affected by the addition of 

this equipment. Do not fill the Mow-N-Vac to its full capacity 

without checking the capability of the towing vehicle to safely 

pull and stop with the Mow-N-Vac attached.

•  Before operating on any grade (hill) refer to the safety rules 

in the vehicle owner's manual concerning safe operation on 

slopes.  Also refer to the SLOPE GUIDE on page 23 of this 

owner's manual. Do not operate on slopes in excess of 10 

degrees. 

STAY OFF STEEP SLOPES.

  Follow the maintenance instructions outlined in this manual.

Look for this symbol to point out important safety precautions. It means — 

Attention!! Become alert!! Your 

safety is involved. 

DANGER:

 

This Mow-N-Vac was built to be operated according to the rules for safe operation in this 

manual. As with any type of power equipment, carelessness or error on the part of the operator can 

result in serious injury. This unit is capable of amputating fingers and hands and throwing objects. 

Failure to observe the following safety instructions could result in serious injury or death.

Summary of Contents for MOW-N-VAC 190-217D-100

























Reviews: