6
3/8 x 1"
HEX BOLT
3/8" NYLOCK NUT
WHEEL
HANDLE
3/8" NYLOCK
NUT
SHOULDER
BOLT
GRIP
FIGURE 11
FIGURE 10
FIGURE 9
• Assemble a 5/16 x 1" hex bolt, washer, spacer, and
5/16" nylock nut to the front hole on each end plate.
See figure 9.
5/16" NYLOCK NUT
5/16 x 1" HEX BOLT
WASHER
SPACER
• Assemble a grip onto each handle. See figure 10.
• Attach a wheel to bottom hole of each handle using a
shoulder bolt and 3/8" nylock nut. See figure 10.
• Attach each handle to the bottom hole in the end plate
using a 3/8" hex bolt and 3/8" nylock nut. Tighten so
that the handle is secure but can still move freely. See
figure 11.
• Assemble a 3/8" x 3/4" clevis pin and a small hair
cotter pin to the end plate and the handle on each
end of the aerator to lock the handles in the transport
position. See figure 12.
SMALL HAIR
COTTER PIN
3/8" x 3/4" CLEVIS PIN
FIGURE 12
• Attach the aerator to your tractor using the hitch pin
and the large hair cotter pin.
