Agreto B300-V4-K354, Manual

Page: 13 / 63

AGRETO Hydraulic Scale
© AGRETO electronics GmbH page:13

Read the weight - it is the net weight of the weighing goods without
packaging.

If you want to weigh several goods in the same empty containers, you can
bring them successively on the scale. As long as the NET symbol is
illuminated the previously determined tare will be deducted and just the net
weight will be displayed

To switch from gross to net, press the [SELECT] button.

To end the tare function, take the entire load of the scale and press the
[TARE] key again.
9.5 Weighing with Sum-function

Bring your front loader (forklifts) in weighing position, wait until the weight is
stable and press the [PRINT] button. Thus, the current weight is added to
the total weight.

To read the sum you press the button [f]. The display first shows the
number of weights in the summation memory (COUNT) and then the total
weight of the total memory (TOTAL).

To delete the total push and hold the [PRINT] button.

The summation can also be triggered with an external button, which the
[PRINT] key practical remote controls. Connect using a cable connection
terminals TX and RX on the weighing display and run this cable isolated
through a push button (NO). When the button is pressed TX and RX are
connected, and the weighing indicator triggers the sum function (Press and
hold to the delete function).
9.6 Switching off the Weighing Indicator
Press and hold the leftmost button until the weighing indicator goes out.